TTGO T4 外壳 3D模型
TTGO T4 Case
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A case for the TTGO T4 v1.3 ESP32 development board.
Only two of three buttons are available as the remaining one is also connected to an internal sensor and therefore not fully usable as user button. Furthermore, boot and reset switches are not made accessible from outside as these are only needed during development and not during operation.
Necessary for assembly:
- 4x M2x12mm
Note that it is not necessary to drill threads into the bottom part if printed with the correct tolerance.
Print Settings
- Printer brand:
Snapmaker
- Printer:
Snapmaker 2 A350
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:15%
- Filament brand:
Maertz Budget
- Filament color:
Black
- Filament material:
PLA+
- Notes:
Print both parts in the given orientation. No supports needed.
It may be necessary to change the tolerance in the included FreeCAD file depending on the used printer.
Tags
License
TTGO T4 Case
by dstarke is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
平滑的脑科学奖2023-03-27 -
安装电缆固定装置2023-05-09 -
ID-O-MATIC IV 重复器控制器外壳2024-01-13 -
Palmer的唇膏持有器/钥匙链2024-04-09 -
鼻尖锥体2024-05-05
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
30.5mm到25mm转换板（用于飞行控制器堆叠结构）2023-04-03 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
螺旋锥形手玩具（全新）2024-05-08 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
罗技K400键盘壁挂式支架2025-07-27 -
模块化笔筒链2025-07-19 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18