Mugen MTC2R 燃油管切割工具

Mugen MTC2R, Fuel line cutter for upstop

2024-04-01 19:38:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Small tool to cut small pieces of a silicone fuel line to be used as an dampened upstop in order not to bottom the chassis too much on the track.
In my experience this works well on very bumpy tracks.
Mine were cut at 4.5mm length, dampens the chassis around 1mm before hitting the track.

Thread used is M6, might be smart to get an M6 screw in first to scrape out any imperfections due to printing.

I printed in a 0.15mm resolution, 100% infill (especially needed for the piston, not the block).