蜘蛛形桁架顶盖

End Cap for SpiderBeam Mast

2024-04-01 21:17:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I print slow because of using TPU with a Bowden tube extruder. No retraction helps. No supports or special bed adhesion required. No post printing work. Part fits just snug enough on the SpiderBeam 12 meter mast to stay on. I printed this because the factory rubber caps cracked in the UV and I lost one.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
Standard
Infill:
20%
Filament brand:
Overture
Filament color:
Any
Filament material:
TPU
Notes:
I print slow because of using TPU with a Bowden tube extruder. No retraction helps. No supports or special bed adhesion required. No post printing work. Part fits just snug enough on the SpiderBeam 12 meter mast to stay on. I printed this because the factory rubber caps cracked in the UV and I lost one.