3dsjs

USB开关螺丝安装在Ikea Lack支架上

USB On / Off switch screw on Bracket for Ikea Lack

2024-04-02 01:05:58

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Needed one to hold the USB switch used to turn my cooau camera on and off when not needed. Here it is. I have bought the USB Switch from Amazon from the brand PANDTOBO. The dimensions of the switch are about: 61mm length and 21,4mm width and a height of around 16,3mm.

you will need two zip ties and two screws to put everything together.

Print Settings

  • Printer brand:

    ELEGOO

  • Printer:

    ELEGOO NEPTUNE 4

  • Rafts:
    No
  • Supports:
    Yes
  • Resolution:
    0,28
  • Infill:
    100%
  • Filament brand:

    Giantarm

  • Filament color:

    White

  • Filament material:

    PETG

Tags

License

CC BY-NC

USB On / Off switch screw on Bracket for Ikea Lack
by tsj_carpfishing is licensed under the Creative Commons - Attribution - Non-Commercial license.

USB开关螺丝安装在Ikea Lack支架上
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢