3dsjs

TKS GTR DJI O3 2.5英寸 FPV架构

TKS GTR 2s-4s REMIX DJI O3 - 2.5in FPV Frame

2024-04-02 03:41:57

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This FPV frame I found from TKS is just awesome. I printed and built multip 2 and 2.5in quads with this frame and flown them in Analog. I wanted to take a slight modification and try a sub 250g DJI O3 HD addition. This is also a perfect upgrade using a Cetus-X Pro FC and motors

2s-4S AIO Flight Controllers Recommendations:

4S - Flywoo GOKU GN405S AIO - F405 BGA FC + 20A BLHeli_S 2-6S ESC (ICM42688)
4S - GEPRC F722 AIO - F722 FC+ 35A 2S-6S BLS ESC
2S - Flywoo GOKU Versatile AIO - F405 FC + 12A 2S ESC (ICM42688) - No RX
2s/4s/6s - BETAFPV F722 V2 AIO - F722 FC + 35A BLHeli_32 2-6S ESC

Motor Recommendations:
2S - BETAFPV 1103 11000KV 2S BRUSHLESS MOTOR (4PCS)
4S - NIN V2 1203PRO 4850KV/5500KV

Props:
AVAN Rush 2.5 Inch Prop

Print DJI Camera plates and Rear Stand in TPU

Print Settings

  • Printer brand:

    Bambu Lab

  • Printer:

    A1

  • Rafts:
    No
  • Supports:
    No
  • Resolution:
    1.2
  • Infill:
    90%
  • Filament brand:

    Bamboo Labs

  • Filament color:

    Orange

  • Filament material:

    ASA

  • Notes:

Tags

TKS GTR DJI O3 2.5英寸 FPV架构
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢