开放式解释器01替代性外壳

Open Interpreter 01 Alternative Enclosure

2024-04-02 06:20:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a V0 model created to house the components called out in the Open Interpreter 01 BOM. This is a piece commissioned by Jason Pyett of Playwell Bricks, so kudos to him for also deciding to share this publicly to anyone who would like to utilize it.

The rubber button, and 2x USB covers are printed in TPU, I printed my first off in black but recommend transparent materials for them to visualize the LEDs inside for status indication.

Note: This is designed so that you do not need to remove the enclosure of the M5-ATOM ECHO.

It will hold the 500mA lipo battery snugly, and the charge controller board by Adafruit sits on top of it and can be screwed down.

This is a Rev0 and further updates will come as I improve the ergonomics and ease of user interface, as well as handle waterproofing it as well as creating a secondary BOM for screws, vents, etc. Further to this a belt clip is being designed as well for ease of access/carrying.

I also used a WAGO 222 3 way splice to handle the common splice for the momentary button. Still working on mounting the large button and the power switch in a convenient and waterproof/resistant fashion.

If you would like the .step files or Fusion360 files just message me and I'll send them along for your own ability to edit as you like.

Print Settings

Printer brand:
Bambu Lab
Printer:
A1
Rafts:
No
Supports:
No
Resolution:
.18mm
Infill:
100%-Use max # of walls and top and bottom layers
Filament brand:
Whatever
Filament color:
Whatever - Recommend transparent
Filament material:
TPU for USB Covers and the Button, PLA or whatever you like for the body