WS2811黑色猫3D模型

WS2811 Black Cat

2024-04-02 08:42:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a prop for WS2811 LED lights. It holds 62 pixels.This has been split to fit on a standard Ender 3 bed. I would recommend printing this out of PETG or ABS to make sure it holds up to outdoor temps. I would not recommend using PLA. I adjust the Z height on the file to about 7.5mm. Adjust this to what you would like to have for thickness. I have included the xlights xmodel in the download. I have also included 4 "open" versions of a few pieces if you wish to save more filament during the print.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Infill:
10-15
Filament brand:
Sunlu
Filament material:
PETG

Tags

halloween Pixel ws2811 xlights

License

CC BY-NC-SA

WS2811 Black Cat
by jobu109 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

WS2811黑色猫3D模型

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

德威特20V工具架
2023-03-26
KABA DORMA 钥匙盖 3D模型
2023-04-27
Peugeot 2008 iPhone Magsafe Holder
2023-06-19
核反应堆
2023-08-27
藏身载具：VKB战斗者装备
2024-03-18

最热下载

BF1 单枪手机 08/18型号 Lego
2024-03-23
Arduino或5V继电器控制板固定架
2024-04-02
BlueSCSI v2 SPARCstation驱动器支架及密封环
2024-04-14
用于RRD通用型70182电机的mayrc maytech桅杆夹
2024-04-20
花环戒指
2024-05-08

最新模型