Sofirn HS20可充电头灯支架

Mounts for Sofirn HS20 Rechargeable Headlamp

2024-04-02 09:38:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Sofirn HS20 comes with a decent rubber mount with non-removable elastic head straps. I prefer my headlamps mounted to a cap, so I designed a mount that I could zip-tie to a curved cap brim.

I've included two STL versions. The curved version follows the contour of a cap brim and requires supports to print. The flat base version is included for whatever other purpose you may find.

I went through quite a few versions to end up with a design that held the headlamp firmly without snapping the mounting clips. If the clips snap on you, I recommend re-printing and then lightly sanding down some of the material at the top of the clips.

You will need four very small zip ties to mount the print to a had brim, as pictured. The headtorch is quite heavy, so I'd recommend mounting it a bit further back than I have.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.16
Infill:
100%
Filament brand:
Whatever
Filament color:
Whatever
Filament material:
PETG
Notes:
The headlamp can get quite hot, so I don't expect PLA would survive without melting. No issues with PETG so far.