圆柱拉动装置

Bobbin Puller

2024-04-02 11:59:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

When using my Cobbler's Sewing Machine, removing the bobbin is not easy without a tool of some sort. This is simply looks like a popsicle stick with a embedded magnets at both ends. Just put one of the ends over the bobbin and it'll lift it right out.
It uses 2 rare earth magnets (I already had some from Harbor Freight item #67488). When slicing the print job, have it stop on the last layer before it covers over the holes that the magnets sit in, drop the magnets in, and then continue the print job. Make sure your print nozzle isn't magnetic!
I just stick the tool to the side of the sewing machine for storage.