手持帽子架

Hand hat holder

2024-04-02 12:13:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

When you open the STL the hand is super small but when I scaled it to an appropriate size the hole for the screw or nail didn't match the screw I had. The specific screw I was using had the diameter of 8 mm(just the top part) and it would only fit if I scaled it to 3000 or something but at that point the hand was too large. So I used Tinker Cad to change the hole for the screw and it looks good.

I wanted to use a sturdy screw and the screw I used, "I think" it's a pretty common screw that many people will have laying around. I didn't use a drywall anchor just put it right on the wall and it worked good.

Oh the print is called 1300 hand because it is scaled 1300% from the original

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
Yes
Supports:
No
Resolution:
.3
Infill:
15%
Filament brand:
Generic
Filament material:
PLA
Notes:
Recommend a brim for the print

I printed it using the fastest setting on Cura.

My printer is pretty tuned not sure it makes a difference or not but I recommend that your printer's hole calibration is good. (Just search up hole calibration on Youtube and follow the steps)