Creality Ender-3 V2 左侧安装工具架改造版

Creality Ender 3 V2 - Tool Rack Remix (Left Mount)

2024-04-02 22:42:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix of RamahDoug's Ender 3v3 SE tool holder. This was the best-looking tool holder I found, but I made a few changes to accommodate mounting on an Ender 3v2 and a slot for a plastic scraper.

This remix removes the Caliper holder unfortunately, but it should now fit most any generic plastic-scrapers. In addition, the bracket is both left-mounted (my Ender 3v2 with dual z-axis did not have the space to mount on the right) and uses rails rather than screw-mounts. I didn't have any spare screws so this ended up being my best option. The fit might be a bit tight, but it should work with a bit of force.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Filament brand:
Elegoo
Filament color:
Black
Filament material:
PLA
Notes:
I used "normal" supports at 1% density for the tool-holder itself. I used "tree" supports at 1% density for the bracket. No brim or raft with good bed adhesion.