手机支架 AN400 Burgman Mj2011

Phone Cradle AN400 Burgman Mj2011

2024-04-03 01:49:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I normally only ride my Burgman (model l0 year 2011) in the immediate vicinity. Only occasionally do I need navigation. The last time I tried it, I attached the smartphone to the handlebars with a Velcro strap. The position was too flat and the display was very reflective.
Recently, I was planning a longer route and navigation was essential. As I had an ender 3 V2 from a colleague at my disposal, an adapter was printed overnight that allowed me to attach the universal cradle from my bike to my scooter.

The universal smartphone holder is screwed onto the profile.
The holder is attached to the front of the steering wheel cover.
At the back, the holder is clamped to the fairing with an m6 thread and a mauly paper clip.

It worked very well for the trip we took. the phone was held firmly in place.

Ideas for improvement for those who want to rebuild:

adapt the front profile to the arrow shape of the fairing
no longer attach the rear fastening centrally because the paper clamp unlocks the central clip on the plastic cover.
also replace the universal holder with a 3d pressure part
the velcro tape is not necessary for this holder and does not need to be provided
replace pla filiament with uv-resistant and stable material

Translated with DeepL.com (free version)