精美设计的Pokemon潜水球3D模型

Pokémon Dive Ball - Fully Functional with Button and Hinge

2024-04-03 03:00:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The dive ball is added to my collection of Pokéballs.

If you have not already, I would look at the instructions for the Pokéball model by MrFozzie, all of the same rules apply here. print the top and bottom details with the round side facing up, and print the round oval as upright as you can. when putting the model together, you will notice that the top and bottom shells have grooves for you to place in the top and bottom details. there is also a top oval detail. this piece is placed in after the top detail is glued onto the top shell, and there will be a small space in the top detail for the oval to fit in.

Print settings:

printed at a 0.15mm layer height on Bambu lab Carbon X1
3 perimeters
10% infill
all parts fill benefit from supports, and the oval detail and pin should have rafts.