KIA EV6扩大后的后排杯架支撑结构

KIA EV6 Enlarged Rear Cup Holder Slide

2024-04-03 08:57:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The holes in the rear armrest cup holder in the KIA EV6 aren’t big enough for Stanley mugs and other popular insulated cups. This replacement slider has bigger holes and a front edge that provides more support to prevent cups from tipping forward.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/gx4GQBDBZkH

Print Settings

Notes:
Use ABS or other heat resistant plastics. PLA won’t hold its shape in a hot car.

Post-Printing

This replaces the cup holder slider in the rear center armrest. Starting at the front edge, carefully pry off the trim ring around the existing cup holder. Remove the OEM cup holder slider and replace it with this.

EV6 tip: The rear center armrest tilts with the left side of the 60/40 split rear seat back. Tilt the seat back to make the armrest and cup holder level.