SRAM X4 骑手轮适配器 3D模型

SRAM X4 jockey wheel adapter

2024-04-04 00:46:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

SRAM has started using a different size bolt to fix the lower jockey wheel (tension pulley) starting with X5 derailleur. This adapter fits into the bolt hole in X5+ tension puller and allows it to be used in SRAM X4.

I have printed it in PETG and had it fit. I don't know whether shrinkage is meaningfully different for PLA/ABS at these sizes.

This adapter is only expected to carry radial compression load and is not expected to rub (it goes between two parts, neither of which rotates), so I expect the choice of material to be mostly irrelevant (as long as the material won't degrade when wet and when exposed to lubricants).