FlashForge 5M传感器支架

FlashForge 5M Filament Sensor Mount

2024-04-04 05:05:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This bracket is designed to position the filament sensor above, rather than behind, the FlashForge 5M. There's no need for additional support. Simply use the 2 existing screws from the filament and another 2 screws from the printer's printing bed that you had to remove when you first installed the printer that were included with your purchase.

Credit goes to: Arnookie(LXD)

Installation video guide:

https://wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy

No need to remove the spool holder in the back if you don't want to.