Anycubic Chiron 强力脚部模组

Anycubic Chiron Strong Feet

2024-04-04 05:05:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I printed several type of feet for my Chiron to raise it up a bit after adding the Bigtreetech Manta M8p, but every time I leaned the printer over on it's side I broke all of the feet I had printed.

So I took a couple of designs, combined and edited them in Tinkercad and just strengthened the heck out of em.

Print two as is, and mirror the other two in your slicer. I used 100% infill for added strength and I printed ball side up with supports on the bottom. Normal supports seemed to work great.

These use standard squash balls available on Amazon. Tecnifibre Double Yellow Dot Squash Balls - 4 Pack. Brand doesn't matter but make sure you get the double yellow dot ones as they are the strongest and compress the least.

Secure with mounting tape, or I used short wood screws on each side of the ball cup.