Cubitos桌面游戏插件V2（扩展兼容）

Cubitos Boardgame Insert V2 (Expansion compatible)

2024-04-04 06:02:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Cubitos from AEG is a fantastic game with poor quality dice boxes. I wanted a dice tray and storage solution that I didn't have to worry about the lid for. Also I'm obsessed with everything sitting vertical so it needed to sit nice and snug. The Thing is the insert for use with the sliding lid boxes https://www.thingiverse.com/thing:4817268

This version updates my previous insert. I didn't anticipate AEG releasing a new board. So I've added some optional filler spacers (print two of the side 1 for your own assembly) that are printed upside down in vase mode. The player components lid has a built in support you can trim off with an exacto knife so you don't need any supports for it.

If you have the core set, you will need:
Side1
Side2a
Side2b
Core-filler
Cards
Tokens
Main-Lid
(plus 8 sliding lid boxes)

If you have the core set and first expansion, you will need:
Side1
Exp-Side2a
Exp-Side2b
Exp-Side2c
Exp-filler
Cards
Tokens
Main-Lid
(plus 10 sliding lid boxes)

If another expansion comes about with a new board, then you don't use core or expansion filler and I will come back and update for a new Side 2 to accommodate.

As a suggestion for stability when printing in vase mode, you can print at double your typical line width. (.4mm nozzle? then .8mm for vase mode).