3D模型：MLG眼镜图形贴纸

Pins for MLG Glasses

2024-04-04 09:21:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Couldn't find any pins around the house so I made my own (0.05 by 0.43) Printed with a 0.4 Nozzle on my Bambu labs A1 Mini with basic filament

Directions:
-Print two of these pin sets
-Wait till one of the pins sticks to the nozzle
-Pause print
Take the print off of the print bed and print again
Finally take the best from pins from your pin sets and smash them down into place with a caliper

(I recommend this on the lowest speed setting of around 50%)