刷电8520可调节飞机型马达支架
brushed 8520 adjustable motor mount (airplane)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
adjustable brushed 8520 motor mount
ball joint between motor and outer ring allows to freely set required motor angle
screws/bolts (one is ok, may use two if desired) are used for fixing angle and tighter motor fit
after printing some sanding is required to smooth ball joint surface
when everything in place, motor should have tight fit but allow rotational movement
during angle adjusting i run the motor without inserting screw/bolt
Print Settings
- Printer brand:
Anet
- Printer:
A6
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.2
- Infill:100%
- Filament brand:
DevilDesign
- Filament material:
PETG
Post-Printing
some sanding of ball joint surfaces
How I Designed This
Fusion 360
Tags
License
brushed 8520 adjustable motor mount (airplane)
by olli_zg is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Voxelab Aquila可连接床手柄2023-03-26 -
DRIOD BODY R2D2 Star Wars2023-03-26 -
管道支撑基座2023-09-16 -
皮卡丘游乐场行李牌2024-03-15 -
巨魔头像 012024-04-21
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
泡泡底拖鞋2025-07-17 -
高跟鞋鞋架2025-07-17 -
艺术雕像（女性）2025-07-16
