PIKVM便宜预制部件

pikvm cheap readymade parts

2024-04-05 01:44:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

pikvm cheap readymade parts

Is nice OpenSource Project:
https://pikvm.org/

I use the PIKVM with a webcam pointed at the screen because I only use it to check if there is a problem and to start my pc. Webcam is cheap works without hdmi problems and is only to see the bios oder restart parsec or xrdp.

print

I have printed it without support, but it may be that you have to rework the two housing screws that connect the top and bottom with a small drill bit.

Fusion file might be a good start for someone else.

build case

pla
9 * M2,5 is 8mm long srew
2 * M2,5 is 16mm long srew
11 * M2,5 nut
2-Relais Modul 5V with Optokoppler Low-Level-Trigger (Srew 45mm * 33.8mm )
USB-C/PWR Splitter made by 8086

Config File

Relay stats are unfortunately inverted for this reason i had to create my own buttons in the config.

nano /etc/kvmd/override.yaml

pikvm doku to gpio

kvmd:
    gpio:
        scheme:
            # Two outputs of RPi's GPIO
            button1:
                pin: 21 # GPIO pin number on the RPi
                mode: output
                switch: false
                inverted : true
            button2:
                pin: 20 # GPIO pin number on the RPi
                mode: output
                switch: false
                inverted : true
        view:
            header:
                title: Invert Start Buttons  # The menu title
            table:  # The menu items are rendered in the form of a table of text labels and controls
                - ["#Generic GPIO"]  # Text starting with the sharp symbol will be a label
                - []  # creates a horizontal separator and starts a new table
                - ["#Start GPIO 21:", button1]  # Text label, one input, one button with text "Click"
                - ["#Reset GPIO 20", button2]