Ninja Thirsti Flavor Holder
Ninja Thirsti Flavor holder
2024-04-05 07:14:25
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is my first ever design as a newbie on both a printer and designer.
I saw this on the internet and recreated it.
on the picture with the rainbow filament i lost power and the print stopped.
the black filament one turned out great.
it's not tight around the machine so you can move it front to back where it's a little bigger
I am dropping this here so that you all can enjoy it.
If anyone can make it better please do.
If you print it please post a pic :)
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra 2
- Supports:Yes
Post-Printing
License
CC BY-NC-SA
Ninja Thirsti Flavor holder
by silentstevo is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Gue'Ron'Vesa MK 2 by El Mutanto2024-04-03 -
CHIMERA/RHINO 3D模型代理模块APC（FDM友好，一层打印完成）2024-04-07 -
Iris隔膜刀片非重叠参数化模型2024-04-18 -
可逆式汽车杯托2024-04-28 -
ZigBee接触门传感器 TS0203 _TZ3000_oxslv1c9 增高器2024-04-30
最热下载
-
螺旋齿轮玩具3D模型2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23 -
Dado - 立方体模型2024-03-24 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
一体打印活动关节熊猫和支架2025-07-25 -
鞋撑2025-07-17 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15
