YoYo - 正确的方式

YoYo - The way it should be.

2024-04-05 12:02:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My daughter found one of my old wooden yoyo's, you know the real ones from the 90's, not these weird new ones with bearings and whatever.

She wanted one of her own, so I set out to make one as I am on a mission to hone my 3D design skills.

Pretty simple design, print two of the Body and one Dowel, simply press the dowel into one body and press the other body onto the other end, they are friction fitment and they won't come apart. 3mm separation in the middle allows for any string to work, even those new fangled ones however they may slip if put on the way the instructions say and not come back up properly.

Open the looped end and slip the knotted loop end through then tighten around the dowel center in the yoyo. I will provide some photos showing how to do it, I am constantly testing this out and my daughter is losing her little mind over this project.

I will provide some photos of the finished product as well, and it will likely improve as I change and modify it to work better.

Stay tuned for more!

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
50 or more
Filament brand:
Polymaker
Filament material:
ABS
Notes:
You can use pretty much any filament and the only supports needed are some small trees for the dowel.

Print the bodies on their flat bottom side and the dowel on either end for best results. I tested both PLA and ABS, worked great either way but try and use as much infill as possible to get the weight up, if it's too light it won't work properly.

I also printed this on a Kobra 2 Pro, came out perfectly, you don't need ironing if you want to save print time, and I used Gyroid infill but anything will work, use what you like.