No 钻孔存储盒

No Drill Dry Box

2024-04-05 13:00:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A remix of my own remix of Swooshy's drybox. I've included the fusion files for the lid plug in case it works elsewhere.

I wanted to build a dry box that could be repurposed if I need to. Drilling holes in boxes is a permanent move.

You'll need 1 x M10 compression fitting per box.
4 x 8mm ball bearings per box
I also ran tubing through the compression fitting to keep the filament from binding.

Containers were purchased on Amazon and were designed for these specific boxes.

The filament base: Adjust in your slicer width only to 74.5 mm. Don't use uniform scaling.
The rollers will fit with no adjustments. Print with Supports
You will also need to change the width of the silica lid as well.