达芬奇智能机器人第二代袖口设计

DaVinci IQ2 Sleve

2024-04-05 13:43:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A functional and decorative sleeve for a Davinci IQ2 Vaporizer. The sleeve provides some protection against drops and scratches while also helping to serve as a heat shield. The sleeve allows easy access to the bottom door and airflow dial, however opening the top door requires removing the sleeve. If you are more interested in aesthetic there is also a "Slim" version.

UPDATED 4/5/24
Version 2 was added to include a channel down the inner side wall to prevent getting caught on the buttons. V2 also has improved "locking in place" by including small pumps that fit into the hinges once the sleeve is on. Note that this does make it slightly trickier to slide on because it also catches on the top hinges, so I'd recommend sliding it on at an angle to start.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1S
Rafts:
Yes
Supports:
Doesn't Matter
Notes:
Can be printed without supports however for the "logo window" it's recommended. I printed on a Bambu Labs CX-1 with 2.8mm layer height.

Sleeve is a tight fit so it will require that your printer be dialed in.