皮具工具盒

Leatherman bit cases

2024-04-05 16:26:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here's a few methods for holding 1/8" flat Leatherman bits. My goal was to fit my Surge with bits into a Skinth L Shield pouch. The tiny hole is for the eyeglass screwdriver. The medium hole is for a 1/8" punch. The large hole is for a .25" punch. (I think it is for the Mut tool or something like that)

I had to scale to 102% in Cura using Inland PETG+. Of course you'll want to rotate this so the bit holes are perpendicular to the build plate! Please use the sample STLs to test fit for your print settings on your bits, and then adjust the print settings or scale of the full-sized STL. I'm going to print a version in TPU as I think that'll be the best option. Please tweak this for your needs using this tinkercad link!