多球旋转模型

Lots of Balls Spinner

2024-04-05 17:24:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Multi-layer ball bearing fidget spinner - mechanically pointless- just for fun. If you have enough balls you can try printing this (just joking - the balls are included).

Diameter 55mm, height 9.7mm, Material req: approx 12g

Suggest to enable supports when slicing to ensure good support of the balls (but small flats are provided on the bottom of the balls for support so not essential).

I may add a 3 layer version if there are enough downloads/ likes.

⚠Warning⚠

Be careful in environments with young children and pets!

This model contains small parts.

If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury.

If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!

Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.

In addition, debris from damage to the model may be accidentally ingested by infants or pets.

If the model is damaged, dispose of it immediately.

Store them in an appropriate place.

After 3D printing, store the model in an appropriate place out of reach of young children and pets.

Proper adherence to the precautions will ensure the safe use of the model.