Aillio防弹豆状物分散器

Aillio Bullet Bean Deflector

2024-04-06 00:55:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I love the look of a "naked" Bullet, so I wanted something I could remove when I wasn't roasting. I also opted for a design that didn't require heat tolerance, so it could be printed in PLA.

Overture matte black PLA matches the colour of the Bullet perfectly!

Print at 100% infill, standing straight up on the bed (normal orientation). Print using a generous brim. I included two small "bridges" at the ends of the bottom slot which prevent the brim from generating within the gap, easing removal. Simply snip them off post-print.

The model only includes the right deflector – Mirror the part in your slicer to create the left piece.

This was modelled to fit the V1.5 Bullet – I'm not sure if Aillio has made any changes to the cooling tray between versions, so I'd appreciate some feedback.