3D模型：Eclipse焊接手机滤镜 - 开启式

Eclipse / Welding Phone Filter - flip open

2024-04-06 05:13:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted a to use an inexpensive eclipse glasses filter on my phone but the rubber band method didn't give me quick access to unfiltered pictures or my phone's light. I ended up creating this simple cantilevered, swing open filter holder. It isn't robust but it only has to last an hour or so.
I used a 3mm rod as a pin but a small machine screw or even a toothpick would likely work. 3mm rod binds to the mount very tightly.
I laid out both parts so that supports aren't needed (at least my PLA bridges the gap without much sag).
I added a raft to the lens slot so it would print vertically avoiding supports.
The slot and mount are two parts to work with phones with lenses at different distances from the edge
On my wife's phone the airplane phone holder interferes with the power button so I simply use more rod to space the mount from the holder.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Filament brand:
copier2go
Filament material:
PLA+

Post-Printing

Add a inch or longer 3mm rod/ bolt/ toothpick to the mount and mate the mount and airplane phone holder of your choice. Cut out a solar eclipse glasses lens, slide into the slot and slide the slot into the mount. In my town I can buy paper solar glasses at the local hardware store and in 2017 I bought them at a gas station.