医疗圆柱体3D模型

Med-Cylinder

2024-04-06 12:55:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted a container to keep some small medical supplies such as bandages, alcohol wipes and maybe a sewing kit to throw in my hunting gear bag. Then I thought why not make one that could hang off of a bag or be thrown inside of it.

So I came up with a longer threaded cap and a hex shaped hole which is large enough for a small-medium carabiner, or my personal favorite option: paracord.

This container is water resistant as far as my testing went. Putting it under running water at a 45 degree angle to the top with a qtip, 2 bandages and a floss stick inside for a minute, and all was dry. The design failed the submerge test and is therefore not watertight, but honestly after 30s of being submerged the water inside was still less than I expected. So, for rain this is okay, but if you're crossing a creek with this on your waist mileage may vary.

Internal dimensions are approximately 35mm in diameter, by 85mm in height, so plan your gear accordingly or print two and tie them together like some medical Nunchaku.

Size comparison between my other containers in the last photo if you have printed any of those.