Brother 666 线盘支架

Brother Charger 666 Sewing Machine Thread Spool holder

2024-04-06 12:55:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Brother 666 线盘支架

Brother 666 线盘支架

Summary

It is a small project I initially did for one my own sewing machines (model is Brother Charger 666) when the original thread spool holder finally broke after 50+ years of use.

To replace the part you have to remove the top case lid held in place by two screws. I reinforced the bottom of the holder (made thicker + rib) to accommodate for difference in materials, all other dimensions are as close to the original ones as possible. Place it on the printer bed normally, infill can be higher if you prefer, just don't go under 25% to keep the part sturdy enough.

Print Settings

Printer brand:
Wanhao
Printer:
Wanhao Duplicator i3 V1
Rafts:
No
Supports:
No
Resolution:
Medium
Infill:
25%
Filament brand:
Generic
Filament color:
Black
Filament material:
PLA 1.75 mm

Tags

brother sewing Sewing thread holder

Brother 666 线盘支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载