2英寸双小型迷你子音箱箱体

2 inch dual mini sub woofer box

2024-04-06 12:55:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

2" Speaker Mini Subwoofer box and lid,

there are 2 versions of the main section.

The "2inch speaker mini dual sub woofer" has Corners cut out inside to fit the speakers I have.
The "2inch speaker dual sub woofer flat inset" is flat inside with a slightly bigger inset to fit most to in speakers

( how you mount the speakers is your choice) by either drilling holes for screws or [What I did] is to use gorilla double sided tape to hold the speaker in place around the metal edges. (Once you press it in to place with a little pressure for an hour... the tape holds GREAT!!!!!!!

then for the Lid.. I started out with a basic printable lid... but wanted to show the detail so I went with a piece of smoked plexiglass..
I used strips of gorilla tape for the " caulking effect" to look more like a real clear top subwoofer box and no screws are needed once it sets.

I then finished it by covering it with the Typical Subwoofer Carpet ( to go the extra mile)

I made this to fit My RC Tonka Summit. made the subwoofer to be more scale. Using a iPod Nano 6 with a home built amplifier to the speakers.
so I have music. The Tonka Summit ( Traxxas Summit Base with a 1980s Tonka bronco modded to fit) is 1/6-1/5 scale, with Full FPV and Autonomous driving. All driving is done from a drivers perspective camera. I have designed this to sit behind the front seats.
I then decided to add EL-Lighting with a clear top ( to give it that extra realism)
we have a forum if interested in RcGroups all about our FPV Tonka Summits and Mods

https://www.rcgroups.com/forums/showthread.php?1333642-FPV-Tonka-Summit