3D模型：Tascam US-1x2HR支架
Mount for Tascam US-1x2HR
2024-04-06 13:38:09
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a mount for the Tascam US-1x2HR Audio Interface. It is designed to mount it under a desk or on whatever you want. Holds it really good. Print 1 mount for each side. The side mount is for mounting it to a flat surface and the top one for mounting it with a right angle.
You'll have to remove the 4 screws on both sides and the original covers for this mount. The screws are used for the top mount but not for the side mount.
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra
- Supports:Yes
- Resolution:0,2 mm
- Infill:25 %
- Filament brand:
-
- Filament color:
White
- Filament material:
PLA
- Notes:
I added a thing plastic object on the side of the desk drawer because it was able to go up a little when using it.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
为我的教学2024-05-08 -
Wii 遥控器（同步按钮）3D模型2024-05-08 -
磁铁支撑块2024-05-08 -
圣诞主题旋转木马2024-05-08 -
鲸鱼玻璃钥匙扣2024-05-06
最热下载
-
模块化抽屉 2.02023-03-26 -
ZTE MU5001 上位电容器2024-01-10
-
苹果 HomePod mini壁挂装饰2024-03-19 -
21700毫安电池单元保持架2024-04-06 -
Enders 3版控制面板2024-05-08