汽车电池通风装置
Car Battery Vent Adapter
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I've adapted the non-functional original to allow for better and easier printing as well as thickened the tube for the battery end so that it doesn't snap on insertion. The flat base allows printing without supports and adds strength to the body of the adapter.
I've made the battery end a diameter of 6mm to suit my battery port. There is plenty of meat there now so you can take off some material to allow for a smaller battery vent hole if needed.
Don't forget to print in ABS as it is very resistant to hydrochloric acid.
Thanks to the originator of the design.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Doesn't Matter
- Infill:20%
- Filament brand:
Generic
- Filament color:
White
- Filament material:
ABS
- Notes:
I used build plate supports only but you probably don't need them.
相关内容
联系我们
热门推荐
-
Fidget Spinner - 单体打印 / 无需轴承2023-03-26 -
Heroscape桥墙2024-01-10 -
Inosuke 3D模型2024-03-23 -
Aqara Relay LLKZMK11LM 智能家居继电器容纳装置2024-04-08 -
TAPP 散弹枪弹壳弹匣释放装置2024-04-13
最热下载
-
钥匙解码器（用于房门钥匙复制）2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
高尔夫球支架 / 展示架 / 陈列架 / 收纳架2024-03-29 -
猫咪零食球2024-03-29 -
欧宝Zafira B倒挡锁止机构（倒挡防误入装置）2024-04-02
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
兔女郎半身像2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15