微软Surface Duo键盘套件 TECHOGEAR活跃打击系列(M)轻薄款
Surface Duo Keyboard Case for TECHGEAR Active Strike (M) Slim
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a keyboard case for the Surface Duo designed to fit the TECHGEAR Active Strike (M) Slim Bluetooth keyboard.
The Surface Duo fits either horizontally or vertically. The screen of the Surface Duo does not get covered/overlapped at all, making it ideal for working with both displays.
The Surface Duo is angled at 110⁰, making it both versatile and comfortable for use on a desk or a lap.
Print Settings
- Printer:
CTC Bizer Dual (MakerBot Replicator Dual clone)
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:60% Hexagonal, 0.2mm layer height
- Filament brand:
Enotepad
- Filament color:
White
- Filament material:
PLA+
- Notes:
4 shell layers. Best to print on its side (see image). You may need to lower the bed temperature or the base may slightly disform.
I used approximately 50g of PLA+ for this print.
Post-Printing
Step 1
Remove from print bed (ensure it has cooled down to avoid warping)
Step 2
Place base of keyboard into bottom clip
Step 3
Clip the case onto the top of the keyboard. This may take a little effort.
Step 4
Place Surface Duo (either vertically or horizontally) into base.
NOTE: If using vertically, ensure the device buttons are at the top! No difference using it horizontally.
How I Designed This
Design Software
I used Tinkercad to make this.
Tags
License
Surface Duo Keyboard Case for TECHGEAR Active Strike (M) Slim
by MegaBytesMe is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
厚度更大的滚筒2023-04-05
-
特斯拉按钮 Mennekes 电缆固定装置2023-08-06
-
迪摩犀牛4200型号挂钩板固定架2024-01-09
-
BMW 5x120衔接件固定支撑架(15,20,30 mm)2024-04-15
-
锤击方块马克斯韦尔 Remix 版本2024-04-17
最热下载
-
法兰尺寸测量工具(小)2024-04-19
-
基础鸟饲料架2024-04-30
-
超越IPD板2024-05-03
-
Enders 3版控制面板2024-05-08
-
厨房水槽滤网过滤器2025-06-05
最新模型
-
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
-
显卡支持2024-05-08
-
E3D固定座适用于Prusa Mendel2024-05-08
-
USB-C 12V PWM风扇控制模块外壳2024-05-06
-
科巴尔特 24V电池固定架2024-05-06