Hauck 安全门转动关节部件

Hauck Safety Gate Pivot Joint Part

2024-04-07 03:40:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my first 3D creation and tested print so apologies for any roughness.

We needed a replacement part for our Hauck gate after the central cylinder snapped off. It is not a 1:1 replacement of the old part but it fits perfectly, and the gate moves like it used to.

Please note that this does not include the part that screws into the bottom of this part and the spring associated with that part. I also do not know what the screw sizes are but can look at them on request.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm
Infill:
20-35%
Filament brand:
eSun
Filament color:
White
Filament material:
PLA
Notes:
I used tree supports for this print. While it can be a slight pain to get out from the hollowed cube, I found that once I detached it from the bottom, I could pull the rest out easily.

Prints fine between 20-35%. I have not tested outside of that range, but I settled on 35% personally.