钥匙环上的装饰标签
keyring tag to hold a label
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
How to design a traditional-style keyring tag, to print with no support? Make it foldable.
I wanted to match some existing tags which can have a label slid into the middle. It had to print quickly and with no supports, and essentially no post-processing. This was designed with the upper and lower parts joined with a thin bridge, 0.4mm wide, as a hinge.
Designed to print at 0.12mm layer height, but all the thicknesses are such that 0.2mm layer height will also match exact layer numbers.
After printing, fold them together with a small amount of dichloromethane-based plastic glue, such as Plastic Weld.
Tags
License
keyring tag to hold a label
by pnt103 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
最新模型
-
垂直货架固定支架2024-05-08 -
无需焊接的Meshtastic RAK Mini GPS模型外壳2024-05-08 -
李公司顶级转盘式夹紧套件2024-05-06 -
Cubo 20 x 20 X Y Z 3D 打印校准模型2024-05-06 -
T形LED标识2024-05-06
最热下载
-
飞行三维 Fly-π 与 Fly TFT V1款外壳 V1.02023-03-26 -
Quansheng UVK6 桌面支架2024-01-10 -
罗宾：不公正22024-04-07 -
沙箱建筑模型2024-05-08
