依赖型水瓶盖

Reliance Aqua-Tainer Lid

2024-04-07 07:01:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm using a Reliance Aqua-Tainer 7-gallon jug as the grey water collection in my Sprinter van conversion. While the original lid does accept 3/4 NPT pipe thread adapters, I needed a lid that I could screw off without twisting up the hose from the sink drain.

The cap ring accepts a common o-ring gasket (sorry I don't know the proper size - it's ~59mm, I think they came out of Nalgene bottles?)

The two nozzles fit in a 5/8ID hose. One accepts the o-ring, the other does not. I didn't want an o-ring because I didn't want another piece to lose. I printed the nozzle in TPU so that I would seal and be less prone to breaking on the road.

The solid cap is to prevent spills when taking the jug out of the cabinet.