Sonicake Levitate音乐效果模块化踏板定制安装

Sonicake Levitate Modular Pedalboard custom mount

2024-04-07 10:53:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A pedal board for Lithium366's Modular Pedalboard designed to accomodate Digital Reverb and Delay pedal by Sonicake.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra 2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100
Filament brand:
SUNLU
Filament material:
PLA
Notes:
I recomend printing at 100% as PLA is fairly cheap but to retain the rigidity in hot summer I recommend using light colors and max infill. It also increases the weight which is good for a pedalboard.
Print laying on its front with no supports or use tree supports.
Locking piece is optional, you may want it for alignment though. Made for M4x12 screws and nuts.
If you intend to use it as standalone or are willing to modify the model there's a base for the board (longpodstawkaTPU.stl) It's optional, but if you print it in TPU as the name suggests, you get a nice rubber base that won't be so hard on your floor and reduce spillage on hard surfaces. It should stay on with just press fit but there are slits to secure it with thin zipties or cable ties if you want to throw it around.

How I Designed This

I absolutely adore the pedalboard that lithium366 made. I took it upon myself to adapt it to all of my guitar effects. Digital Reverb and Delay pedal by Sonicake was a thing I've wanted to add, ended up using the board to make it standalone, as my girlfriend probably won't use anything else for quite some time learning. It was made for her as a gift.