德威特零件组织分隔器

Dewalt Parts Organizer Divider

2024-04-07 11:22:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Designed for the Dewalt Medium Tough Box Storage System linked below. The box came with six flexible dividers, but had space for 12. This file is modeled after the original as best as I could measure flexible plastic. I've successfully printed three which fit perfectly inside the box. If you do not wish to print this in TPU, PLA may work but I have not tested it, and some additional tinkering with the file may be required for exact fitment.

Printer I am using is basic Voxelab Aquila with a Bowden extruder. TPU settings at 215 degrees F and 55 degree F bed with .2 initial layer/.15 additional layers.

https://www.walmart.com/ip/Bit-Case-DW2190/55593273

I hope someone can get use out of this. If you have one of these boxes and need more dividers, feel free to drop a comment and let me know if you were able to use it.