六边形壁架

Hex Wall Shelf with Hexagon Background

2024-04-07 12:05:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my Hex Wall Shelf with Hexagon Background with is part of my Hex Wall Shelf series. These are able to hold Funko Pops and other figures with no issues. I wanted to make these Hex Wall Shelves on the bigger side to give my figures a small scene behind them. The Hexagon background was my first design for the shelves and then I ended up designing many more backgrounds and some attachments which I will be uploading. I hope you enjoy these Hex Wall Shelves as much as I am.

I used the Hex Wall Shelf - Screw Attachment to hold up my main Hex Wall Shelf and I put a small command strip on the back of my other shelves for added support. I made these shelves approximately 8x8 in (W & H) and the shelf is 4.5x4.5 (W & L) Make sure the shelf can support whatever it is you want to display.

*This was originally remixed from the “Minifigure Display” on Thingiverse. I kept the pegs and peg holes because I liked the design and I designed the rest. I will be working on this design to make improvements when needed.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
.16 mm
Infill:
5%
Filament brand:
Bambu Lab
Filament color:
Ocean Blue
Filament material:
PLA
Notes:
0.16mm layer, 2 walls, 5% infill. I've printed in both PLA and PETG filaments. I didn't use any supports. I did get a little bit of stringing around the middle grooves but it is removed easily and doesn't cause any issue