Talentcell PB120B1夹持架，适用于天文望远镜AZ-GTI

Talentcell PB120B1 Clamp On Bracket for Skywatcher AZ-GTI

2024-04-07 13:04:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I combined a file for a 30mm clamp onto a top and bottom holder for the talentcell PB120B1 to fit the Shywatcher AZ-GTI tripod legs. It is quick install and quick release for easy movement.

Print Settings

Printer brand:
Sovol
Printer:
SV04
Rafts:
No
Supports:
No
Resolution:
1.5
Infill:
100
Filament brand:
Creality
Filament color:
Black
Filament material:
PETG

Post-Printing

After printing, You will need to cut the hinge and clip lines into the section that was stuck to the build plate. It went very easy for me with a hobby knife. Once you score it, it will open. I used a brim to print as well.