Toshiba t3100e SD IDE插槽

Toshiba t3100e SD IDE board slot

2024-04-07 16:28:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a very rough hack of the SD card adapter by NilsR to make it fit in the drive cage of a Toshiba t3100e vintage 286 laptop. It is quite a tight squeeze inside the laptop, so could be refined further, but it works!

To make it fit I had to desolder the Molex connector on the SD adapter and solder the wires from an IDE power connector directly to the board. Alternatively you could use an IDE to floppy power adapter if you have one.

Also the "key" on the IDE data cable in the t3100e seems to be on the wrong side, so I had to cut a notch in the plastic surround of the IDE connector on the SD card adapter.