超低扭矩固定扳手

Fixed Torque Wrench - super low torque

2024-04-07 16:43:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Fixed Torque Wrench remix with either 0.1Nm or 0.2Nm.

I needed a torque wrench to assemble my new Phaetus Rapido 2 hotend and the instructions mention that a torque of only 0.1Nm should be used. So I recreated the awesome design by A_R_B and started experimenting.
The result was two rotors which can reliably trigger at either 0.2Nm or 0.1Nm (0.115 to be precise, but close enough for me...). They have only 6 instead of 12 fins, which are each also much thinner and shorter that the originals, but everything is still printable with a standard 0.4mm nozzle.
These rotors fit the cases made by A_R_B, so please go ahead an download them from there.

For both torque settings there is also a special version where a 1.5mm hex key can be inserted, in case standard bits are too bulky to reach the screws.