金轮 KP3S PRO S1 Z轴极限附带垃圾箱
Kingroon KP3S PRO S1 Z-Axis Limit with a TrashBox
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I made this limit because I found that my Kingroon KP3S Pro S1 printer's Z-axis limit screw was moving a lot, causing me to have to calibrate it for every print. Additionally, even during printing when the homing process ran, it would move and throw off the leveling. I've set a comfortable height for myself.
Furthermore, I added a small box that can be removed to contain the small leftover material from prints, supports, strings, etc.
The box can be lifted up when the print is finished and the bed is very close to the Y-axis zero point, and I've noticed that it fits snugly, at least for me.
Important!: Tighten the screw well so it doesn't move.
I hope you can provide me with feedback.
Print Settings
- Printer brand:
Kingroon
- Printer:
Kingroon KP3S
- Rafts:No
- Supports:No
- Resolution:.2mm
- Infill:20
- Filament brand:
R3D
- Filament color:
Green
- Filament material:
PLA
Post-Printing
相关内容
猜你喜欢
联系我们
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
平滑的脑科学奖2023-03-27 -
巨魔头像 012024-04-21 -
升级杠杆式加油系统：适用于Jimny 2019 LHD2024-04-22 -
超清乌龟鱼缸2024-05-04
最热下载
-
Valorant 杰特的姿态2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
螺旋锥形手玩具（全新）2024-05-08 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
HGX lite v2支架2025-07-18 -
鞋带锁2025-07-17 -
苍井空老师全身像苍井空跪姿2025-06-27