抽屉分隔条

HTH Drawer divider

2024-04-08 01:17:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is not a remix but a complete redesign. I'm aware that there is another similar divider but it does not fit to well..

This snaps into place when printed correctly.

I designed this because you cannot order a single divider but have to order two. A single divider costs about 11€ and two of-course 22€.

Add to that shipping costs.

Print Settings

Printer:
RatRig V-Minion
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament brand:
Spectrum (Industrial)
Filament color:
SILVER STEEL
Filament material:
PET-G HT100
Notes:
Hot-end 280° Phaetus Dragonfly BMO

Bed 135° (Spectrums HT100 requires a high bed temperature, adjust yours to your filament) but for this filament a chamber is recommend but not required if your printer room is not subject to draft.

Post-Printing

snap it in.

Snap it in and out a few times if i will not snap easy the first time.

How I Designed This

Prototyping..

I used this red filament i got to make a prototype in order to make something that would snap in.

抽屉分隔条

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Wii 枪机制：Gunslingers 旧式手枪触发器模组
2023-03-26
鸡蛋绘画机迷你（Eggbot衍生版）v1.1
2025-07-16
斯坦利杯
2024-01-11
Enders 3版控制面板
2024-05-08
厨房水槽滤网过滤器
2025-06-05

最新模型