各种角落挂钩，重量型 - 001

Assorted Corner Brackets, Heavy - 001

2024-04-08 04:40:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A single modle containing 16 brackets in various sizes.

4 brackets each 20mm wide: (approx)

25mm by 25mm (1" by 1")
25mm by 45mm (1" by 1 3/4")
45mm by 45mm (1 3/4" by 1 3/4")
40mm by 70mm (1 1/2" by 2 3/4")

Best made with many wall thicknesses, this model does not require supports, though skirts might be helpful. I used PLA for my test print.

4 wall thicknesses, 2 top shells, 2 bottom shells, 10% grid, worked out to just 100g of filament and 4h20 of print time on my AnyCubic Kobra Neo. (just one iteration of the model, though my plate could fit four of these as layed-out)

The whole model is 107mm by 107mm, so in theory, 4 of these models could be placed on a single 220mm by 220mm build plate.

They can be stacked 0.2mm apart if you iron all horizontal faces, and easily print 64 brackets per layer (great for over-night printing).

I'm still perfecting this, but what a great way to eat-up some dead printing time and get some useful stuff for all of your DIY projects!

Take, eat, all of you. This is the model... yeah. Sorry. Take, remix, download, print, sell, whatever. I just like making shit for my workshop and providing them here for the community.

Cheers!