贝瑞塔CX4风暴侧边铁架组件套件

Beretta CX4 Storm Side rail set

2024-04-08 09:02:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

贝瑞塔CX4风暴侧边铁架组件套件

贝瑞塔CX4风暴侧边铁架组件套件

Summary

The bottom rail kit only comes with one side rail, although you need two to actually mount it (shit design shoutout beretta). This is just a 1 to 1 remake of it so you can print both halves in whatever color you want. Would probably work with ABS but I wouldn't use PLA as the handguard gets warm throughout the day. Print with the Pic rail facing up and support the underside since it will be mounted anyways.

This one is printed in GF PA6 for Polymaker, CF Nylon would also work fine.

Also... make sure your screws are vertical, it's good craftmanship ;)

NOTE: Before printing, ensure that modifications like these are legal in your state, I claim no responsibility for misuse.

Print Settings

Rafts:
No
Supports:
Yes
Resolution:
0.15mm
Infill:
25
Filament brand:
Polymaker
Filament color:
Gray
Filament material:
GF PA6

贝瑞塔CX4风暴侧边铁架组件套件

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

尖峰装饰附件
2024-04-04
Elegoo Phecda 十字光标激光模块与空气辅助管支架
2024-04-06
TBS源一V5 Matek M10Q 5883 Vifly GPS伴侣SMA安装座
2024-04-11
巨魔头像 01
2024-04-21
Daisy小雏菊开花装饰
2025-06-26

最热下载

最新模型