SPL!SH 浴头持有器

SPL!SH Shower Head Holder

2024-04-08 19:02:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Shower Head Holder and Bar Replacement

Design
The shower head holder bracket broken, the shower bar broken, no replacement for just the broken part? We had enough of always having to buy the complete set of handle, bar, tube… for which we had above that never a real need since the shower head remained in just one position all the time.

So we designed a simple replacement consisting of two parts:

The mount has a screw hole and uses one of the upper holes (probably already there if you removed your old shower bar) to be screwed to the wall.
The holder simply slides on the mount and accommodates the shower head or rather the hose leading to the shower head and puts it in the right place for a splashing shower!
The shape itself is rather reduced and simply so it would not interfere with whatever bathroom fit out and equipment you already have. Both the hose and also the fitting of the hose, which attach to this replacement, are mostly normed parts it should fit to almost any shower head /hose.

We have been using ours for two years now and still find it very convenient!

Construction
Both parts are cylindrical and have been designed with the right tolerance to slide onto each other but still stay in place and also to be printed with 4 perimeters wall thickness in order to make the parts watertight. This is important to prevent water from entering the parts so they stay hygienic…

Slicing & Printing
Standing upright (orientation as in the files) the parts can be printed without supports. We recommend printing them with a minimum of 4 perimeters wall thickness in PETG. Other materials, even PLA if you wish, will probably also do the job… Above that there are no other recommendations, just print it…

Happy Printing and relaxing showers!