Commander X16外壳

Commander X16 Case

2024-04-08 22:42:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Commander X16 3D printed case.

Printed with Ender 3 V3 SE with PLA.

Case size is 254mm x 254 mm x 70 mm

Assembled with Dogbone dutchman, and can be glued with CA or Hotmelt
Recommend gluing top parts together.
Top plate uses 5mm tall dogbones to connect to top plates.
Case is too large for many printers so in four parts.
Full case STL provided for view but not tested for full size print.

Print 1 of each case part
Print 1 of each top part
Print on set of dogbanes 8x5mm and 4x3mm
Print 3 Side badges
Print 1 top plate
Print 1 backplate (optional)

Use supports on case parts.
Top plate is rounded over, so use support of brims based on your computer.

use #4 5/8 or 3/4" wood screws to mount board to case

16mm push button for power switch
12mm push button for reset switch
Various options on Amazon for switches
one 3mm screw, washer and nut for attaching back plate, will need to drill mounting hole in case
Button Badges are optional, can be just held in place by button or by glueing

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Supports:
Yes
Notes:
Use supports on Case parts, may also need brims on some parts depending on your printer